Troubleshooting Tips

Excessive Blackouts in planes

if you are experiencing excessive blackouts in planes this may be caused by your controls being oversensitive. the first step to try is to goto the ww2ol keymapper calibration screen. hit the 'reset' button in the top left corner. this will default your global.calib file to the default values in case by accident some sensitivity filtering settings are causing your controls to be oversensitive.

the next step would be to lower the sensitivity of your joysticks x and y axis a bit, this is done on the ww2ol calibration screen and there is a full tutorial on this website.

NOTE: if you use seperate .calib files for certain vehicles or vehicle types [calibration tutorial -adavnced tricks] such as air.calib. you'll need to delete the file and recreate it from scratch to reset it to what you wanted.

Planes or Vehicles handling differently

same as above, reset or recheck your calibration files.

NO Joystick input or JS input really 'wacky'

this can be caused by certain usb keyboards that install extra HID-device drivers that cause problems in ww2ol and are not really needed. there are a couple of solutions for this, the first is to replace your usb keyboard with a ps/2 one or use an adapter, the other is go into 'device manager' for your OS and disable the offending hid devices under the HID device header.. [you'll have to disable them one at a time to see which one fixes the problem]